Build your own Water Tank Automation using Raspberry Pi 2024

[zinekiw]

• We will get to know about the project concept and the problem which we are going to solve by developing this project.
• Thereafter, we will cover the stepwise approach to be followed, so that the learning curve remains easier for the project development.
• Going forward, we will understand the complete hardware requirements for the project development and its individual usage.
• Then we will proceed to learn about Raspberry Pi and its detailed specification.
• We will then came to know, how to download and burn the latest version of the operating system to the SD card and configure the Pi for its usage via SSH.
• We will then learn how to assign a static IP address to the Raspberry Pi by making certain changes in the operating system files.
• Thereafter, we will proceed with the update and upgrade of the software library packages.
• We will then step into the world of physical computing and learn how to test the motor pump which we have purchased for the project development.
• We will then learn about the working principle of the relay and test the functioning of the relay using our customized program.
• We will then get to know about the distance measurement sensor and how to assemble the same with the Raspberry Pi.
• Thereafter, we will understand the program using which we can measure the accurate distance between the object and the sensor.
• Finally, we will test the last module of the project which is our LCD. We will first learn about the I2C detection and then programmed the LCD to print.
• After testing all the modules, we will start the main project. We will follow a standard circuit diagram and complete the assembly of the tank automation.
• Finally, we will understand the set of two different programs which act as the driving force for the execution of the project.

Note: Coupon Code for free subscription may expire in next 3 days.

Loading…

www.udemy.com