Deimuta
Search Engine Strategist
2
MONTHS
2 2 MONTHS OF SERVICE
LEVEL 1
300 XP
Folder Cr@ : https://www.fshare.vn/file/HMCJHGI19YQK
2. Folder NLM :
3. NLM Online : https://knowledge.autodesk.com/sear...desk-network-license-manager-for-windows.html
English Tut for Who can't understand what the heck im telling, high recommend you guys should look at image, it's far better than this English guide <(") :
It is best to disconnect your Internet connection before installing.
Download the software also unzip it.
3. Run the sfx.exe file with Administrator access also allow the software to be extracted to the default path; then the software installation process starts automatically.
4. At the Serial request, enter one of these codes:
666-69696969 667-98989898 400-45454545
Moreover enter the following in the Serial Product Key: (if necessary) *001K1 (for AutoCAD) *057K1 (for AutoCAD LT)
5. For Select your License server model, select Single License Server from the drop-down menu also enter 127.0.0.1 for the server name. If you receive a message on the license file. Ignore them additionally install the installation process. (For example, click on Continue)
6. It is best to block an Internet firewall from accessing the software.
7. Download also open the Crack file separately.
8. From within the Crack folder, refer to the appropriate x86 or x64 folder for your system architecture. 8.1. Convert one of the two nlm.msi files to their system architecture (for 32-bit systems nlm11.14.1.3_ipv4_ipv6_win32.msi and for 64-bit systems nlm11.14.1.3_ipv4_ipv6_win64.msi) with Run Administrator access and License program Install the manager (you must right-click on the file also click Run as administrator).
8-2. Copy and replace the existing file in adskflex.exe file in C: \ Autodesk \ Network License Manager.
8.3. Copy and replace the existing file in the file adlmint.dll in the C: \ Program Files \ Common Files \ Autodesk Shared \ CLM \ V7 \ MSVC14 file.
9. Open the lic.dat file (available in the Crack folder) through Notepad. Change the license file to fit your system, so that instead of HOSTNAME also MAC, put the values ​​appropriate to your system as follows: 9.1. Run the LMTOOLS Utility program (now installed on your system). In the System Settings tab, place the value displayed in front of the computer / hostname instead of the HOSTNAME also the value displayed against the Ethernet instead of the MAC USE_SERVER in the lic.dat file. 9.2. At the end, add the amount in the License edite file to the end of the content contained in lic.dat (copy all the entries from the beginning to the end) and then save the changes. 9.3. Copy the lic.dat file to C drive.
10. Run the LMTOOLS Utility program. (Lmtools.exe file) 10-1. Refer to the config services tab. – In the Service Name, type the word Autodesk. – In front of Path to lmgrd File, enter C: \ Autodesk \ Network License Manager also lmgrd.exe. – Enter the C: \ lic.dat versus Path to license file – check the start server at power up also use services options. – Click Save Servise.
10-2. Refer to the service / license file tab. Select the configuration using services option. Select the LMtools ignore option file path env var. (Check).
10-3. Refer to the start / stop / read tab. Moreover, click on the start server, also then rereadlicense file, also wait for each of them to complete their operation.
10-4. Refer to the status server tab. Also, also click on perform status enquiry.
11. Run the software. Also have fun.
Edited by tungcsv, 07 January 2019 - 06:05 AM.
2. Folder NLM :
3. NLM Online : https://knowledge.autodesk.com/sear...desk-network-license-manager-for-windows.html
English Tut for Who can't understand what the heck im telling, high recommend you guys should look at image, it's far better than this English guide <(") :
It is best to disconnect your Internet connection before installing.
Download the software also unzip it.
3. Run the sfx.exe file with Administrator access also allow the software to be extracted to the default path; then the software installation process starts automatically.
4. At the Serial request, enter one of these codes:
666-69696969 667-98989898 400-45454545
Moreover enter the following in the Serial Product Key: (if necessary) *001K1 (for AutoCAD) *057K1 (for AutoCAD LT)
5. For Select your License server model, select Single License Server from the drop-down menu also enter 127.0.0.1 for the server name. If you receive a message on the license file. Ignore them additionally install the installation process. (For example, click on Continue)
6. It is best to block an Internet firewall from accessing the software.
7. Download also open the Crack file separately.
8. From within the Crack folder, refer to the appropriate x86 or x64 folder for your system architecture. 8.1. Convert one of the two nlm.msi files to their system architecture (for 32-bit systems nlm11.14.1.3_ipv4_ipv6_win32.msi and for 64-bit systems nlm11.14.1.3_ipv4_ipv6_win64.msi) with Run Administrator access and License program Install the manager (you must right-click on the file also click Run as administrator).
8-2. Copy and replace the existing file in adskflex.exe file in C: \ Autodesk \ Network License Manager.
8.3. Copy and replace the existing file in the file adlmint.dll in the C: \ Program Files \ Common Files \ Autodesk Shared \ CLM \ V7 \ MSVC14 file.
9. Open the lic.dat file (available in the Crack folder) through Notepad. Change the license file to fit your system, so that instead of HOSTNAME also MAC, put the values ​​appropriate to your system as follows: 9.1. Run the LMTOOLS Utility program (now installed on your system). In the System Settings tab, place the value displayed in front of the computer / hostname instead of the HOSTNAME also the value displayed against the Ethernet instead of the MAC USE_SERVER in the lic.dat file. 9.2. At the end, add the amount in the License edite file to the end of the content contained in lic.dat (copy all the entries from the beginning to the end) and then save the changes. 9.3. Copy the lic.dat file to C drive.
10. Run the LMTOOLS Utility program. (Lmtools.exe file) 10-1. Refer to the config services tab. – In the Service Name, type the word Autodesk. – In front of Path to lmgrd File, enter C: \ Autodesk \ Network License Manager also lmgrd.exe. – Enter the C: \ lic.dat versus Path to license file – check the start server at power up also use services options. – Click Save Servise.
10-2. Refer to the service / license file tab. Select the configuration using services option. Select the LMtools ignore option file path env var. (Check).
10-3. Refer to the start / stop / read tab. Moreover, click on the start server, also then rereadlicense file, also wait for each of them to complete their operation.
10-4. Refer to the status server tab. Also, also click on perform status enquiry.
11. Run the software. Also have fun.
Edited by tungcsv, 07 January 2019 - 06:05 AM.